Industry Directory | Manufacturer
An innovative thermal management company that is dedicated to address the thermal challenges that the electronics industry is facing.
Industry Directory | Manufacturer / Other
OEM Contract Manufacturer, Prototype production, battery testing, quick turn production, high/Low volume production. OEM products, complete box build, sub assembly, battery chargers, power supplies, microphones, cable and flex assembly.
New Equipment | Rework & Repair Equipment
Stainless Steel Brush (SH-60) 2 5/16" Made of over 300 long, fine, stainless steel bristles. Use to clean flux from solder joints, clean flux and adhesive from solder pad and for general cleaning purposes. Available in Standard and Miniature
New Equipment | Rework & Repair Equipment
Made of over 300 long, fine, stainless steel bristles. Use to clean flux from solder joints, clean flux and adhesive from solder pad and for general cleaning purposes. Available in Standard and Miniature sizes. Stainless Steel Brush (3 1/2"
Electronics Forum | Tue Jun 14 15:18:13 EDT 2005 | jdumont
How do I send pics....sorry for the ignorance.
Used SMT Equipment | SPI / Solder Paste Inspection
Vintage: 2008 Description: 3D Solder Paste Inspection Details: • 3D sensing system w/ built-in fiducial camera and lighting • MicroPad Sensor • Mechanical board stop • Auto-width adjust conveyor • Max PCB width: 20” x 20” • Max inspection
Used SMT Equipment | Soldering - Selective
Pillarhouse Jade MKII Selective Soldering Machine Model: Jade MKII Year: 2016 Lead-Free Drop Jet Fluxer Top Side IR Pre-Heat Auto Soler Top-Up & Solder Level Detect Inerted Nitrogen System Thermal Nozzle Calibrati
Industry News | 2003-03-21 08:12:24.0
Tecan reckons it is consistently producing what may be regarded as the most efficient stencils in the world today.
Industry News | 2015-04-23 16:30:38.0
Metcal is pleased to announce that SMTA China awarded its Applications Manager, Paul Wood, ‘The Best Presentation of Vendor Conference One’ for the presentation titled “Why Non-Contact Array Solder Clean Up is required.” The award was presented during the SMTA China East 2015 Conference Award Presentation Ceremony on April 22, 2015 at the Shanghai World Expo Exhibition & Convention Center in conjunction with the SMTA China Annual Award Ceremony.
Parts & Supplies | Assembly Accessories
AA8MG00 H08M 5.0G nozzle with rubber pad 1. Same size as original. 2. perfect substitutions for original smt parts. 3. can produce according to customer's requirements.
Parts & Supplies | SMT Equipment
500/501/502/503/504/505/506/507/508 series nozzle for SMT JUKI machine KE2010——2040 PART No. PART NAME SIZE(mm) REMARKS E3608-729-0A0 #500 ASS'Y(2-HOLES) 0.5/1.0 E3600-729-0A0 #501 ASS'Y φ0.7/φ0.2 E3601-729-0A0 #502 ASS'Y φ0.7/φ0.4 E3602-729-0
Technical Library | 2007-01-31 15:17:04.0
The goal of this project is to evaluate the reliability of lead-free BGA solder joints with a variety of different pad sizes using several different BGA rework methods. These methods included BGAs reworked with both flux only and solder paste attachment techniques and with or without the use of the BEST stay in place StencilQuick™. The daisy chained test boards were placed into a thermal test chamber and cycled between -25ºC to 125ºC over a 30 minute cycle with a 30 minute dwell on each end of the cycle. Each BGA on the board was wired and the continuity assessed during the 1000 cycles the test samples were in the chamber.
Technical Library | 2023-08-04 15:27:30.0
A designed experiment evaluated the influence of several variables on appearance and strength of Pb-free solder joints. Components, with leads finished with nickel-palladium-gold (NiPdAu), were used from Texas Instruments (TI) and two other integrated circuit suppliers. Pb-free solder paste used was tin-silver-copper (SnAgCu) alloy. Variables were printed wiring board (PWB) pad size/stencil aperture (the pad finish was consistent; electrolysis Ni/immersion Au), reflow atmosphere, reflow temperature, Pd thickness in the NiPdAu finish, and thermal aging. Height of solder wetting to component lead sides was measured for both ceramic plate and PWB soldering. A third response was solder joint strength; a "lead pull" test determined the maximum force needed to pull the component lead from the PWB. This paper presents a statistical analysis of the designed experiment. Reflow atmosphere and pad size/stencil aperture have the greatest contribution to the height of lead side wetting. Reflow temperature, palladium thickness, and preconditioning had very little impact on side-wetting height. For lead pull, variance in the data was relatively small and the factors tested had little impact.
www.unisoft-cim.com/pcbtest.htm - In minutes the Unisoft ProntoTEST-FIXTURE software translates CAD & BOM files into real reference designators, netlists, X/Y component pin geometries, values, tolerances, part numbers, etc. This data is used by Test
The PCB Footprint Expert is a powerful CAD library development tool powered by our own proprietary CAD LEAP Technology (Libraries Enhanced with Automated Preferences). It is packed with very powerful advanced library management features that cuts foo
Training Courses | | | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Events Calendar | Mon Apr 12 00:00:00 EDT 2021 - Mon Apr 12 00:00:00 EDT 2021 | ,
Europe Chapter Webinar: Tombstoning Components during Reflow Soldering - Causes & Cures
Events Calendar | Wed May 31 00:00:00 EDT 2023 - Wed May 31 00:00:00 EDT 2023 | Holtsville, New York USA
Long Island Chapter Meeting: Fine Feature Paste Printing, Stencil Design and Solder Technology
ORION Industries | http://orionindustries.com/pdfs/gappad.pdf
. * Graphs and data generated from Young's Modulus, calculated using 0.01 inch/min. step rate of strain with a sample size of 0.79 inch2. MODULUS * The modulus of Gap Pad VO is rate dependent due to its viscoelastic properties
KingFei SMT Tech | https://www.smtspare-parts.com/sale-37304008-kxf07qvaa00-pad-for-cm402-cm602-1005-nozzle-cm-mtnp002974aa.html
: 1005 Pad Model: KXF07QVAA00 Size: Standards High Light: KXF07QVAA00 SMT Spare Parts , CM402 SMT Spare Parts , MTNP002974AA SMT Pad KXF07QVAA00 Pad for CM402 CM602 1005 Nozzle CM MTNP002974AA More Details: Part Name